Service graphs
|
|
|
|
Graph Information
This graph shows the temperature in degrees Celsius of the hard drives in the machine.
Note: This service is in CRITICAL state because one of the values reported is outside the allowed range. Please see further down for information about the ranges and the graph for the values.
| Field | Internal name | Type | Warn | Crit | Info |
|---|---|---|---|---|---|
| nvme0n1 | nvme0n1 | gauge | 57 | 60 | |
| nvme1n1 | nvme1n1 | gauge | 57 | 60 | |
| nvme2n1 | nvme2n1 | gauge | 57 | 60 |
|
| sda | sda | gauge | 57 | 60 | |
| sdb | sdb | gauge | 57 | 60 | |
| sdc | sdc | gauge | 57 | 60 | |
| sdd | sdd | gauge | 57 | 60 | |
| sde | sde | gauge | 57 | 60 | |
| sdf | sdf | gauge | 57 | 60 | |
| This field has the following extra information: Command '/usr/sbin/smartctl -A --nocheck=standby /dev/sdf' on drive sdf failed with exit(1) | |||||
| sdg | sdg | gauge | 57 | 60 | |
| This field has the following extra information: Command '/usr/sbin/smartctl -A --nocheck=standby /dev/sdg' on drive sdg failed with exit(1) | |||||
| sdh | sdh | gauge | 57 | 60 | |
| This field has the following extra information: Command '/usr/sbin/smartctl -A --nocheck=standby /dev/sdh' on drive sdh failed with exit(1) | |||||
| sdi | sdi | gauge | 57 | 60 | |
| This field has the following extra information: Command '/usr/sbin/smartctl -A --nocheck=standby /dev/sdi' on drive sdi failed with exit(1) | |||||